the battery, plug in the charger connector at your phone
(USB interface) and then plug the other end into an AC
power socket.
The battery symbol indicates the charging status. While
charging, the charge indicators will scroll. When all the
scroll bars are steady, the battery is fully charged.
Disconnect the charger from the phone. Disconnect the
charger from the AC power socket.
Attention: Charge the phone in a well ventilated place
o
o
in which the temperature is from 0
C to +50
C. Use
the charger provided by the manufacturer only. The
use of unconfirmed charger may lead to dangers and
violate the manufacturer's warranty clause. If the
temperature is too high or too low during the charge,
the device will automatically send a warning and stop
charging to avoid damage to the battery or any
danger.
Switch On and Off
Do a long press the Switch on/off key to switch on/off the
phone. If the device is switched on but the SIM card isn't
inserted, the lock screen will show "No SIM card"
After inserting the SIM card, the screen will show the notes
in the following order when the phone is switched on:
Type in PIN — If you have already set the SIM code.
Search—The handset will be searching for proper network
connection.
Unlock SIM card
To avoid illegal use, the SIM card is enciphered with PIN
(personal identification number ) as a protection. When
this function is ON and you have already set a PIN code,
you need to type in PIN code every time the handset is
switched on in order to unlock SIM card and use the
handset.
You can turn off the SIM PIN code. Yet in this situation, the
SIM card can't prevent illegal use.
9