Westfalia 345052600001 Instrucciones De Montaje página 2

SIARR
46 - 27
PREPARATION
* Remove the bumper.
* Remove the captive nuts from the reinforcement of the bumper.
ASSEMBLY
* Insert the towing in the spars and fasten temporarily
with the nuts and bolts "A"
* Counter drill with a diameter of 10,5mm the benchmark
holes "B" (only the rear skirt)
* Position the cover at the center of the sheet metal inside the boot.
* Insert carefully the 2 tapped slabs through the opening and
fasten the towing with nuts and bolts "B".
FINISHING
* Tighten to the torques specified as follows.
* Perform a cutting of 150x50 in the center of the reinforcement of the bumper.
* Perform a cutting of 150x50 under the bumper.
* Fasten the reinforcement of the bumper with the nuts and bolts "C"
* Reinstall the bumper.
FASTENING KIT
2 off HM10x80 screws
2 off 10/24 flat washers
B
2 off DEC10 washers
2 tab nuts
4 off HM8x25 screws
4 off M8 nuts
C
8 off 8/16 flat washers
4 off DEC8 washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 off HM10x80 screws
A
4 off 10/35 flat washers
4 off DEC10 washers
4 off HM12x40 screws
D
4 off DEC12 washers
4 off 12/32 flat washers
2 off HM16x45 screws
E
2 off DEC16 washers
2 off HM16 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
(-E-)
Type Type
Approval No.
Tow bar for
Kia Carnival 2 and 3 e11*94/20*00*4340
of 2003 and 2006
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\WESTFALIA\NDM4627-E - FOLIO NDMANG
345052600001
Max. Total Max. Total
Authori. Weight Towable Weight
2 730 kg 2 000 kg
Max. Verti- Value
cal load D
75 kg 11,32 kN