Stereo Headphones
Casque d'écoute stéréo
Operating Instructions
Manuel d'instructions
Manual de instrucciones
MDR-E9LP
©2021 Sony Corporation
4-264-526-51(1)
Printed in Vietnam
Imprimé en Vietnam
English
Stereo headphones
Feature
300 kJ/m
3
high power neodymium magnet is used to
reproduce powerful bass sound.
Specifications
Type: Open air, dynamic / Driver units: 13.5 mm (CCAW),
dome type / Power handling capacity: 100 mW (IEC*) /
Impedance: 16 Ω at 1 kHz / Sensitivity: 104 dB/mW /
Frequency response: 18 Hz – 22,000 Hz / Cable: Approx. 1.2
m (47.25 in), Y-type / Plug: L-shaped stereo mini plug / Mass:
Approx. 6 g (0.22 oz.) without cable / Supplied accessories:
Earpads (2)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without
notice.
Replacement parts: earpads
Please consult your nearest authorized Sony retailer or
www.sony.com for information about replacement parts.
Precautions
• High volume may adversely affect your hearing.
• Do not use the unit while walking, driving, or cycling.
Doing so may cause traffic accidents.
• Do not use in hazardous areas unless the surrounding
sound can be heard.
• There is a danger that small parts may be swallowed. After
use, store in a location out of reach of small children.
• Do not put weight or pressure on the headphones as it
may cause the headphones to deform during long
storage.
• The earpads may deteriorate due to long-term storage or
use.
Note about static electricity
If you use the unit when the air is dry, you may experience
discomfort due to static electricity accumulated on your
body. This is not a malfunction of the unit. You can reduce
the effect by wearing clothes made of natural materials that
do not easily generate static electricity.
How to use
Wear the earpiece marked in your right ear and the one
marked in your left ear.
There is a tactile dot on the unit marked to distinguish
the left side.
Tactile dot
If the headphones do not fit your ears, put on the supplied
earpads.