Wireless 6400
BELT-PAC OPERATION:
With power off
Mode
Press
Setup
Release buttons
press and hold A1 or A2 button
Customer arrives
You hear alert sound in headset
Press & hold
Routine
You hear stall number or
Operation
"drive-thru" in headset
Speak/Listen to customer
Release
customer
Press & release
communication with customer
If there are more customers waiting to be served, you will automatically be alerted for
the customer who pushed the call button first. Customers in the drive-thru lane will be
served ahead of customers in drive-up stalls.
CHANGE BATTERY:
If you hear "Battery low" or "Change battery" in your headset;
Slide battery-release latch in direction of arrow
Place battery in battery-charger port for recharging
Install fully charged battery in Belt-Pac
For more detailed operating instructions, go to www.hme.com/userManuals.cfm
For HELP call HME Technical Support at 1-800-848-4468 or Fax (858) 552-0172
Power on/off
Headset volume up
Headset volume down
or
Select & talk to next customer
Disconnect from customer
Push To Talk
+
+
In this mode,
to talk to customer
Double beeps for drive-up stalls
Single beeps for drive-thru lane
or
or
to stop talking to
to end
Drive-Up Communication System
One-Touch Hands Free
With power off
Press
+
+
Release buttons
In this mode,
press and release A1 or A2 button
to talk to customer
Customer arrives
You hear alert sound in headset
Double beeps for drive-up stalls
Single beeps for drive-thru lane
Press & release
You hear stall number or
"drive-thru" in headset
Speak/Listen to customer
Press & release
communication with customer
or
to end
HME# 400G583S
Rev A
5/26/06