Front Of The Mediatec Tnt - essentiel b MediaTec TNT Manual Del Usuario

Front of the MediaTec TNT

Explanation of the indicator lights
Continuous
Communication with the computer in progress
Formatting/ Installation in progress
MediaTec TNT on standby
or
MediaTec TNT is starting up
Pressing on a remote control button confirmed
Recording in progress
MediaTec TNT is on
Reset (held down)
Disk error
(no disk, disk not detected, disk not formatted or disk da-
maged)
Reset Mode
During the reinitialisation of the MediaTec TNT, the blue indicator will be continuously
lit whilst holding down the "reset" button, then will remain continuous during
starting up.
If the "reset" button is held down for at least 5 seconds, the 3 indicator lights will
flash rapidly and simultaneously.
• If you keep the "reset" button held down for 5 seconds more
(being 10 seconds in total), the product will be totally reformatted.
• Blue light: lit when pressing RESET
• After 5 seconds of holding down RESET: the green, blue and red
lights will flash.
• After 10 seconds. The green light will flash during the
installation process.
Flashing
13
Off
Fast flashing
Slow flashing
En