Mopar 82209882 Instrucciones De Montaje página 2

STEP 5
Re-install Hood Protector onto hood. Ensure that the boss
heads of the screwplugs locate into the slots in the Hood
Protector tags. Centralize and secure Hood Protector to
hood using the large screws and large washers provided.
See FIGURE 5.
STEP 6
Note the areas where the three bumpons correspond to the
hoods paintwork. Mark these areas with a non-permanent
marker or pencil. Clean these areas with alcohol wipe
provided, then adhere abrasive resistant tape strips, as
shown. See FIGURE 6.
TO REMOVE: Reverse above procedure.
IMPORTANT: Retain installation instructions for future
use.
LARGE
WASHER
LARGE
SCREW
5
6
SUP279
2/6
K6859752
82209882