Battery Charging; Troubleshooting - Denver SC-16 Manual Del Usuario

Pair Process:
Turn on the monitor ,press main menu key to display the main menu. press UP/DOWN button to
select Add ,press OK button, then press UP/DOWN button to select the camera which you need
to pair. "Press pair on cam" will show on the LCD.It means that the monitor is paring status.
Turn on the camera ,and press power button twice, the power led on the camera will flicker,
then you can see the video on the monitor .

Battery charging

Camera
If the camera is low battery, the power LED on the back of camera will flicker, so need to connect
DC 5V adapter to charge the camera.
Monitor
If the monitor is low battery, you can see battery icon on the monitor will be red and you can
hear the pepe tone for alarm. so need to connect DC 5V adapter to charge the monitor.
Signal Indicators:
Signal Strength
Indicators
Note: when you take care of your baby sleeping by our baby monitor kit, you should note the singal
strength indicators on the LCD monitor to make sure baby safty more . Please reference to above
table. And also note the pepe tone alarm if no signal from baby camera.

Troubleshooting

Problem
No video
Can hear the pepe alarm tone
Description
Perfect signal
Low signal
No signal
Solution
Make sure the camera and monitor in
effective range. And check if the cameras
are working well.
Please check the battery of camera and
monitor if it is enough to work.
ENG 
ENGLISH