Descargar Imprimir esta página

Storage And Disposal Instructions; Technical Data; Ec Conformity Declaration; Topcom Warranty - Topcom BABYVIEWER 4500 Manual De Usuario

Ocultar thumbs Ver también para BABYVIEWER 4500:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Babyviewer 4500
12.3
Registering the parent unit with the baby unit
– Switch the baby unit off.
– Cover the light sensor with a black cloth and switch the
baby unit on. The Power LED on the baby unit flashes
quickly for approximately 15 seconds.
– With the parent unit switched on, press and hold the play
button
18
for a few seconds.
– An icon appears in the display.
– Press the menu button
– "C1 ...." Appears initially, then "C1 .... OK". When a
connection is established, the image viewed by the lens
appears in the display.
If "C1 .... X" appears (registration failed), it may
be necessary to remove the batteries from the
baby unit for a few seconds before trying again.

13 Storage and disposal instructions

We recommend that you keep the box and
packing materials so you can use them to
transport the equipment in the future if necessary.
13.1
Storage
Remove the batteries (regular or rechargeable) from the parent
unit and the baby unit.
Store the equipment in a dry location.
13.2
Waste disposal of package materials
The package materials are environmentally friendly
materials that can be given to your local waste collector
for recycling.
13.3
Waste disposal (environmental protection)
Dispose of the equipment in accordance with the
provisions of European Directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE),
regarding discarded electrical and electronic
equipment. Contact your municipal waste disposal
department for information.
Dispose of batteries (regular or rechargeable) in an
environmentally friendly manner in accordance with local
regulations.

14 Technical data

Frequency
Range
Operating temperature
Parent unit
Display
Rechargeable batteries
AC mains adapter
Dimensions
Weight
Baby unit
Image sensor
Lens
Night vision
Batteries
to confirm the selection.
23
2,4GHz
Outdoors: up to 300 m (Line of
sight)
Indoors: up to 50 m
0°C to 40°C
20% to 75% relative humidity
3,5" (8,8 cm) TFT LCD
Included battery pack:
– SKL BL-50C
– Li-ion
– 3,7V 1100 mAh
Manufacturer: Sure Power
Model: SW-060080EU
Input: 100~240V AC, 50/60Hz,
0,2A Max
Output: 6 V DC / 800 mA
approx. 137 x 84 x 60 mm
125 g (without rechargeable
batteries)
Colour CMOS
f 4.4mm, F 3.0
4 Infrared LED
4 Alkaline cells (LR03/AAA) (not
included)
AC mains adapter
Dimensions
Weight

15 EC conformity declaration

TOPCOM EUROPE NV hereby declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
The declaration of conformity can be found at http://
www.topcom.net/cedeclarations.asp

16 Topcom warranty

16.1
Warranty period
The Topcom units have a 24-month warranty period. The
warranty period starts on the day the new unit is purchased. There
is no warranty on standard or rechargeable batteries (AA/AAA
type). Consumable or defects causing a negligible effect on
operation or value of the equipment are not covered. The warranty
has to be proven by presentation of the original or copy of the
purchase receipt, on which the date of purchase and the unit-
model are indicated.
16.2
Warranty exclusions
Damage or defects caused by incorrect treatment or operation
and damage resulting from use of non-original parts or
accessories are not covered by the warranty. The warranty does
not cover damage caused by outside factors, such as lightning,
water and fire, nor any damage caused during transportation. No
warranty can be claimed if the serial number on the units has been
changed, removed or rendered illegible. Any warranty claims will
be invalid if the unit has been repaired, altered or modified by the
buyer.
16.3
LCD defect policy
Despite the highest possible standards, the intricate
manufacturing of liquid crystal display (LCD) screens may still
produce slight visual imperfections. However, there will be
provided a warranty service for your Babyviewer 4500 LCD
screen if there are:
– 3 bright dots or 5 dark dots or 8 bright and/or dark dots in total; or
– 2 adjacent bright dots or 2 adjacent dark dots; or
– 3 bright and/or dark dots inside an area of 15mm diameter
These TFT LCD screen warranty conditions are offered by the
LCD manufacturers. Therefore, at its option, the
product will be repaired or replaced.
Please note: A bright dot is a white or sub-pixel that is always on.
A dark dot is a black or sub-pixel that is always off.
Manufacturer: Sure Power
Model: SW-060080EU
Input: 100~240V AC, 50/60Hz,
0,2A Max
Output: 6 V DC / 800 mA
approx. 86 x 100 x 125 mm
132 g (without batteries)
®
7

Publicidad

loading