How To Program - Hamilton Beach FlexBrew 49988 Manual De Instrucciones

How to Program

1
For the first time you program, press and hold P
display. While continuing to hold the P
Set time according to "How to Set the Time for the First Time" on page 9.
5
10
(After the Time Has Been Set)
2
button for 3 seconds until "19:99" flashes on
ROGRAM
button, press the T button. "12:00" will flash on display.
ROGRAM IME
The blue light around the P
ROGRAM
button will illuminate to indicate
the unit will automatically start
at your desired time. After the
program autostart time has been
set, the autostart sequence can
be toggled on/off by pressing
the P button for less than
ROGRAM
1 second. To review the autostart
time, press the P button
ROGRAM
and hold for 3 seconds. After the
initial program setting, time will
default to the last programmed
autostart time set.
3 4
Press and release P button
ROGRAM
again to set autostart.