English
ELECTRIC ROTARY TIE RACK
Useable for 64 ties and 8 belt hooks.
Fig.1
Fig.3
Instructions:
-
To install on the round bar of your closet(fig. 1&2),
Place the top support on the bar and slide it so that the 5 prongs fits into
the 5 slots of the rack. Then tighten the bolts so that the rack can not move.
-
The tie rack can also be installed under the shelf with use of screws(not provided);
To install under a shelf, first screw the top then slide the block so that 5 prongs fit into the 5 slots.
-
Accessory for belt (fig.3)
Insert the 4 hooks provided in the 4 slots can which are under the machine.
-
Battery(fig.4)
Operates on 4 cell "C" type batteries ( not included.)
-
Press the button left and the rack turns left and press right, the rack will turn right.
Battery warnings:
-
Do not mix old and new batteries.
-
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel cadmium) batteries.
-
Do not dispose of batteries in fire.
-
Batteries may explode or leak.
-
Ensure that use the proper polarity when replacing batteries, with the correct battery type, and as a
simultaneous set,or equivalent.
-
Remove batteries if consumed or if the product is unused for a long time.
Fig.4
Fig.2