Safety Warnings - VELFORM Tri-wave Curler Manual Del Usuario

English
The Velform® Tri-wave Curler lets you
create the latest in waves and curls for
different hairstyles: from high fashion to
the most natural looks.
Please read this user manual carefully
and pay close attention to all the safety
instructions before using the product for
the first time. Keep this manual on hand
for future use.
CONTENTS

1. Safety Warnings

2. Velform® Tri-wave Curler
3. Instructions for Use
4. Cleaning and Maintenance
1. SAFETY WARNINGS
DANGER! As with most
electric devices, parts remain
electrically
when the switch is in the OFF
position.
To reduce the risk of serious
injury caused by electric shock,
follow the instructions below:
• Make sure that the mains
voltage corresponds to the
voltage printed on the product
label.
• Do not leave the device
unsupervised
plugged into the mains. Always
unplug the device immediately
after use.
• WARNING: Do not use
this
bathtubs,
basins or
containing water.
• Do not place or store the
device where it can fall to
the ground or into a bath or
4
charged even
while it is
appliance near
showers,
other vessels
washbasin.
• Do not place or submerge
the device in water or any other
liquid.
• If the device falls into water,
unplug it immediately. Do not
touch the device while it is in
the water.
Warning: Do not use this device
near baths, showers, basins or
other vessels containing water.
• Dry your hands carefully
before using or touching the
buttons on the device and
before touching the socket or
mains connection.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or
concerning use of the appliance
in a safe way and understand
the hazards
Children shall not play with
the appliance. Cleaning and
user maintenance shall not
be made by children without
supervision.
• Use the device only for its
specific purpose as described
in this manual.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
instruction
involved.