Emergency Stop - BH FITNESS G-6446 N Manual De Instrucciones

Program graphs:
By pressing the MODE key when the machine is
READY, the LED for MANUAL mode will start
to flash, use the (+ -) keys to select a program
setting (P1 to P6), the corresponding program
LED will start to flash. Once you have selected
a program, press the ENTER key to confirm it
and the LED will remain lit.
After you have confirmed your chosen program,
there is a bar at the back of the machine
providing three manual elevation positions, see
Fig. (9) in the assembly instructions. Position 1
corresponds to the highest elevation setting (L-
3), position 2 medium level (L-2) and position
3 the lowest level (L-1).
Next the TIME display will start flashing. Use the
(+ or -) keys to specify the duration of the
program (5 – 99 minutes). Each program and
level is divided into 12 elevation and speed
stages. There is a one minute warm-up period
for the first stage of all the programs. Press the
START key and the machine will start to operate
based on the values it has been given. You can
change the elevation and speed settings at any
time during the exercise by pressing the (+ or-)
keys on the monitor.

EMERGENCY STOP

For the user's maximum safety, this unit is
equipped with a safety key (g) and a STOP /
RESET button. The safety key (g) must be
slotted into its housing (E), Figure 2, otherwise
the machine will not start.
When you are using the machine always clip the
cord on the safety key to your clothing. Tugging
on the cord will pull the safety key out of its slot
and the machine will stop immediately. To restart
the machine simply put the key back into the
key slot. Remove the safety key (g) whenever
the machine is not being used and keep it out of
children's reach.
Pressing the red button marked STOP/RESET
will also stop the unit immediately. To restart it,
press the button marked START again.
8