Hansgrohe PuraVida 27844 Serie Manual Del Usuario página 7

Assembly (see page 34)
Gloves should be worn during installation to prevent
crushing and cutting injuries.
Important! Do not use silicone containing acetic acid!
Important! The wall bar must be mounted stress
relieved!
Where the contractor mounts the product, he should
ensure that the entire area of the wall to which the
mounting plate is to be fitted, is flat (no projecting joints
or tiles sticking out), that the structure of the wall is
suitable for the installation of the product and has no
weak points.
The enclosed screws and dowels are only suitab-
le for concrete. For another wall constructions the
manufacturer's indications of the dowel manufacturer
have to be taken into account.
Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses. Shower hoses are only suitable for a con-
nection from the shower to the fitting. Never fit a shut-off
device between the fitting and the hose.
The premounted filter insert must be used to ensure
a normal flow of the shower and to prevent dirt from
entering through the pipes. Dirt entering can affect
the function and/or lead to damages to the shower.
HansGrohe will not be held liable for this type of dama-
ge.
Technical Data
Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Spare parts (see page 3)
Special accessories
corner fitting set (28694000); tile-matching-disk
(98993000) order as an extra
English
Operation
The shower system may only be used for bathing, hygie-
nic and body cleansing purposes.
Children as well as adults with physical, mental and/or
sensoric impairments must not use this shower system
without proper supervision. Persons under the influence
of alcohol or drugs are prohibited from using this
shower system.
Do not allow the streams of the shower touch sensitive
body parts (such as your eyes). An adequate distance
must be kept between the shower and you.
The product may not be used as a holding handle. A
separate handle must be installed.
Adjustment (see page 38)
Cleaning (see page 39)
max. 0,6 MPa
0,1 - 0,4 MPa
max. 60 °C