Quick Tour; 3D Sound Bar Sb1 - Toshiba SB1 Manual Del Usuario

Quick Tour

This section identifies the various components of the 3D sound bar SB1.
For a description of each component, please refer to the table beneath
each illustration.

3D Sound Bar SB1

Front view
(Sample Illustration) The front view of the 3D sound bar SB1
Item
1
The sound bar will restore from your last selected mode when it is back
NOTE
from the standby mode with the AC adaptor connected. But if you
disconnect the AC adaptor and connect it again, the sound bar will start
with Aux-in mode by default.
Item
2
3
4
5
6
User's Manual
Component Description
INPUT Selects the source (in the sequence of Aux-in,
Line-in, Optical, Coaxial and then back to Aux-
in).
The sound bar is set to Aux-in mode by default.
Component Description
MODE Sound mode selects.
VOLUME +/- Increases/decreases the volume.
POWER Turns the sound bar on or puts it into the
standby mode.
Remote Receives the remote control's signals.
sensor
Power Glows white while the sound bar is ON and red
indicator while it is OFF or in the standby mode.
3D SOUND BAR SB1
EN-5