Charging The Battery; Insert Micro Sd Memory Card; Turning On Your Phone; Changing The Language - AEG BX30 Manual De Consulta Rápida

CHARGING THE BATTERY

•
Connect the charger to a power
outlet.
•
Connect the charger to its jack
on the mobile phone (Figure 4)
•
When the charging process is
complete, disconnect the charger
from the outlet and from the
phone.
Warning: Always be sure to charge
your phone in a location with
ambient temperature between
-10ºC and +45ºC, and always
use chargers supplied by the
original manufacturer. The use
of unauthorized chargers may
be hazardous, and will void the
manufacturer's warranty coverage.
INSERT MEMORY
CARD MICRO SD
The memory card slot is located
behind the battery.
1.
Remove the battery
FIGURE 4
compartment cover.
2.
Remove the battery if installed.
3.
Insert the Micro SD memory
card as shown in figure 5.
4.
Insert the battery, slidding it
into its compartment, with the
contacts in the correct position
(see image).
Replace the battery compartment
cover.
FIGURE 5
TURNING ON YOUR
PHONE
To turn on your phone, first make
sure that it has a charged battery
installed andthat the SIM card is
properly inserted. Press and hold
the On/Off key.
CHANGING THE
LANGUAGE
To change the language on your
mobile phone, take the following
steps:
18