Important Safeguards; Parts Description - Alpina SF-7638 Manual De Instrucciones

When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, unless they have been given supervision or instruction by a person
who is responsible for their safety concerning the use of the appliance. Children should be supervised to ensure that
they do not play with the appliance
PARTS DESCRIPTION
1. Suction
2. Hole
3. Switch
4. Dust collection cover lock button
5. Handle
6. Hole
7. Shoulder strap
8. Square brush
9. Short flexible hose
10. Round brush
READ THESE INSTRUCTIONS CAREFULLY
1. Do not use without dust bag and/or filters in place.
2. Don't put any object into openings; keep it free of dust, hair and anything that may reduce air flow.
3. Keep hair, loose clothing, fingers away from openings and moving parts.
4. Use extra care when cleaning on stairs.
5. Do not use to pick up flammable liquid such as gasoline or combustible materials like cigarette buts, matches, and
don't pick up sharp objects.
6. Check the hose regularly, if damaged in any way, repair it or replace a new hose immediately.
7. Always unplug this appliance before connecting or disconnecting vacuum hose.
8. Use only on dry, indoor surfaces.
INSTRUCTION FOR USE
1. Assembling the filter ‐ Hold the filter frame and put in the Dust collection cover the surrounding gap should be well
proportioned. REF 1.
2. Closing the dust collection cover‐ Put the square catch of the dust collection cover in orientation groove. Push the
cover until it locks. REF 2.
3. Connection of the hose‐ Plug the hose into the suction orifice. REF 3.
4. Connecting the accessories‐ According to environment choose the adaptive attachment and plug it into the suction.
IMPORTANT SAFEGUARDS
2
ENGLISH