Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
DESCRIPTION
1. Shaping disc
2. Large filing cone
3. Buffing disc
4. Small filing cone
5. Motor unit
6. Cuticle lifter
7. Body
8. Built-in nail dryer
9. Nail dryer On/Off switch
10. Nail dryer battery compartment
11. Air inlet
IMPORTANT SAFEGUARDS
● Please read this instruction manual carefully before use and keep in a safe
place for future reference.
● Home use only. Do not use for industrial purposes.
● Do not drop into water or any other liquid.
● Keep away from children.
● Do not use other attachments than which supplied.
● Do not attempt to repair, adjust or replace parts in the appliance.
Repair the malfunctioning appliance in the nearest service center.
BEFORE USING FOR THE FIRST TIME
INSERT THE BATTERIES
● Two AA batteries 1.5 V are used for motor unit, two AA batteries 1.5 V are used for
dryer
(not included)
.
● Open the battery compartment lid on the motor unit and insert the batteries
according to polarity.
● Set the switch into needed position.
INSTRUCTION FOR USE
● To connect the Attachments to the main body, directly push them in.
● To remove them, just pull them off the head of the unit.
● Make sure that the motor unit switch is in the off position before connecting of
removing
attachments. You can chose between two speeds, which can be regulated with the
switch.
4
Head of the unit
Speed switch
SHAPING DISC
● To remove dead skin from hands and feet.
BUFFING DISC
● Used to lightly polish the nails at the end of the manicure/pedicure treatment.
LARGE FILING CONE
● To file and treat the surface of thick toenails
SMALL FILING CONE
● To file and treat the surface of thick toenails and fingernails. Use this attachment
like the large conical file.
ADVICE
● For better performance of the product, do not wet your hands of feet before treatment.
Do it once the manicure or pedicure is completed.
● Finish your treatment by soaking hands in warm, soapy water, and then apply
moisturizer or lotion. This will help to keep hands hydrated and protect nails.
BUILT-IN NAIL DRYER
● Open the battery compartment lid on the body (10) and insert two AA batteries
1.5 V according to polarity.
● Push the nail dryer on/off switch (9).
● When nails feel dry, depress the nail dryer on/off switch.
CARE AND CLEANING
● Switch off the appliance, unplug from the power supply and allow it to cool fully.
● Wipe over the housing of the appliance using a soft damp cloth.
● Do not use abrasive cleaners.
● The attachments can be cleaned with rubbing alcohol.
SPECIFICATION
Power supply
4 batteries 1.5 V AA
5
Battery
compartment lid
.
Publicidad
