Electrolux EWF 127450 W Manual De Instrucciones página 6

6 electrolux
Display
The display shows the following information:
7.1:
• Duration of the selected programme
The duration is calculated automatically on
the basis of the maximum recommended
load for each type of fabric. The duration
of the programme is displayed in hours
and minutes (for example 2.05 ). The time
remaining is updated every minute.
• Delayed start
The delay set appears on the display for a
few seconds, then the duration of the se-
lected programme is displayed again.
• Alarm codes
Some alarm codes can be displayed in the
event of operating problems (for example
E20 , see paragraph «What to do if...»).
• Incorrect option selection
If you set an option not compatible with the
selected programme, the message Err is
displayed for a few seconds. The integra-
ted red light of button 8 starts flashing.
• End of programme
At the end of the programme three flashing
zeros are displayed. The pilot light 9 and
the pilot light of button 8 go out. The door
can be opened.
7.2: Washing programme phase icons
• Wash
Programme Selector Dial
It allows you to switch the appliance on/off
and/or to select a programme.
All manuals and user guides at all-guides.com
7.4 7.5
7.3
• Rinses
• Drain
• Spin
When you set the washing programme, all
washing programme phase icons are shown.
After the programme has started, the only
icon of the running phase stays on.
7.3: Heating phase
The animation of the temperature icon on the
display shows that the appliance has started
the heating phase of the water in the tub.
7.4: Soil degree icons
• Intensive
• Normal
• Daily
• Light
• Quick
• Super Quick
• Refresh
• Super Refresh
When you set a programme on the display
appears an icon indicating the degree of soil-
ing automatically proposed by the machine.
7.5: Child safety lock
Lock» paragraph).
Temperature
This button allows you to increase or de-
crease the washing temperature.
7.1
7.2
(this icon lights on during the
Steam phase as well)
(see «Child Safety