Installation Instruction; User Servicing Instructions - ECOHOUZING FW23-A1 Guia De Inicio Rapido

INSTALLATION INSTRUCTION

This window fan comes fully assembled and is
ready for immediate installation.
This window fan has been designed to fit
double-hung, slider and casement windows with
minimum openings of 24" Wide and 13" high.
This fan is designed and recommended for used
with your window screen in place.
OPERATING INSTRUCTIONS
1. Make sure rotary switches are
in the OFF position.
2. Plug into 120V AC electric outlet.
3. Set the individual fan motors on
either IN, OUT or EXCH using
the control lever.
4. Turn the Thermostat Control to
its highest setting (fully clockwise).
5. To start the unit turn the rotary switches to desired speed.
6. While the window fan is on, turn the Thermostat Control counter-clockwise
towards the smaller dots until the fan stops (Away from Cooler ). This is the
selected comfort level.
7. If the fan is stopped and you want to turn it back on, turn the Thermostat
Control clockwise until the fan starts, towards the larger dots (Towards Cooler).

USER SERVICING INSTRUCTIONS

1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
3. Remove fuse carefully. Push the fuse from the other side or turn fuseholder
over to remove fuse.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse (provided with
product.)
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice: 1. When you replace fuse, please don't operate suddenly or overexert, or
else the product will be damaged or cause accident.
2. When you feel it hard to be operated, please make sure you have got the
right way.
2