Symbol Explanation; Safety Notes; Correct Use; Transport, Storage And Packaging - oventrop vindo TH Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1.4 Symbol explanation

Safety guidelines are displayed by symbols .
These guidelines are to be observed to avoid
accidents, damage to property and malfunctions .
!
DANGER
DANGER indicates an imminent dangerous
situation which will lead to death or serious
injury if the safety guidelines are not
observed .
!
WARNING
WARNING indicates a possible dangerous
situation which may lead to death or
serious injury if the safety guidelines are
not observed .
!
CAUTION
CAUTION indicates a possible dangerous
situation which may lead to minor or
moderate injury if the safety guidelines
are not observed .
NOTICE
NOTICE indicates a possible damage to
property which may occur if the safety
guidelines are not observed .

2 Safety notes

2.1 Correct use

Safety in operation is only guaranteed if the set
is used correctly .
The set consisting of a ZB isolating fitting
"Multiflex F" and a thermostat "vindo TH" is
used in central heating and cooling systems
with closed circuits for room temperature
control at radiators with integrated distributor
with a distance of 50 mm between the pipe
centres .
Any use of the set outside the above application
will be considered as non-compliant and misuse .
Claims of any kind against the manufacturer
and/or his authorised representatives, regarding
damages caused by incorrect use, cannot be
accepted .
The observance of the installation and operating
instructions is part of the compliance terms .
2.2 Possible dangers at the installation
location and during transport
The case of an external fire was not taken into
consideration when constructing the set .
!
WARNING
Hot surfaces!
Risk of injury! Do not touch without
safety gloves . The set may get very hot
during operation .
Sharp edges!
Risk of injury! Only touch with safety
gloves . Threads, bore holes and edges
are sharp .
3 Transport, storage and
packaging

3.1 Transport inspection

Upon receipt check delivery for any damages
caused during transit and completeness .
Any damage must be reported immediately
upon receipt .
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Multiflex f

Tabla de contenido