Wurth Master 22-180 H Manual Original página 13

OBJ_BUCH-1029-001.book Page 13 Tuesday, June 30, 2009 4:39 PM
Working Advice
Belt Clip (see figure B)
With the belt clip 5, the cordless worklight, as an example, can be
hooked to a belt. The user has both hands free and the cordless worklight
is always at hand.
Maintenance and Cleaning
The cordless worklight is maintenance-free and and contains no compo-
nents that must be replaced or maintained.
To avoid damage, clean the plastic lens of the cordless worklight only
with a dry, soft cloth. Do not use cleaning agents or solvent.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by a Würth master-Serv-
ice.
In all correspondence and spare parts orders, please always include the
article number given on the type plate of the machine.
The current spare parts list for this power tool can be viewed in the Inter-
net under "http://www.wuerth.com/partsmanager" or be requested from
your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in accordance with
the legal/country-specific regulations from the date of purchase (verified
by invoice or delivery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or improper handling is
excluded from the guarantee.
Claims can only be accepted if the power tool is sent undisassembled to
a Würth branch office, your Würth sales representative or a customer
service agent for Würth power tools.
English–13
30.6.09