ABC Design 0830 Instrucciones De Uso página 4

1. Assembling the frame
a) Remove the frame from the packaging.
b) Press both red catches on the rear of the high-chair frame at the
same time and push the sliding fittings down until they click into
place.
c) Attach the plastic base fittings to the front and back of the frame.
Secure the base fittings with the screws provided.
Caution: Ensure that all the catches are engaged before use.
2. Attaching the seat
a) Place the seat unit on the high-chair frame.
b) Secure the seat by inserting the stabilising rod in the opening
provided and attaching it at the other end with the clip supplied.
c) Attach the footrest on the bracket from above.
3. Attaching the castors and feet
a) Fit the two castors on the rear chair base.
b) Fit the two feet on the front chair base.
c) The castors are fitted with braking devices.
EN - 06
b b
c
b b
c
a b
4. Attaching the tray
a) Move both tray attachment arms on the seat unit into horizontal
position.
b) Pull the catch on the underside of the tray. Stand facing the chair and
push the tray onto the attachment arms.
c) The tray has three position settings.
d) The tray can be taken off and stowed on the back of the high-chair on
the red catches.
5. Adjusting the angle of recline
a) Pull the lever on the rear of the backrest. The seat can now be set in
one of three different positions.
b) The angle of recline can also be adjusted when your child is in the
seat.
6. Adjusting the height of the seat
a) Press the two red catches on the front of the high-chair at the same
time. Move the seat to the required height and fix into place by
releasing the red catches again.
7. Folding the high-chair
a) Remove the tray and attach it to the rear of the high-chair
(see point 4 d).
b) Press both red catches on the rear of the high-chair at the same time
and push the sliding fittings up until they are fully engaged. This
collapses the frame so that it can be folded up.
Caution: Ensure that all the catches are engaged before use.
b b
d
a
a
b b
EN - 07