VERY IMPORTANT
This device operates VIA RADIO. Before installing, make
sure the range is good enough at the BASE installation
point.
To do so, carry out a provisional installation (no pre-
installation works required) of the OUTDOOR PANEL and
place the telephone BASE in the selected site, so that
you can check the correct operation of the unit.
Positioning in higher spots and as near as possible to
the outdoor panel will give the best results.
In two-storey buildings, the optimum position will be on
the upper floor.
If batteries are uncharged, you can take out this test with
the telephone charging on the base.
FERMAX DECT ENTRY SYSTEM
Pag 3