GB
Safety Instructions
1. Read all the instructions in the user manual.
2. Keep the user manual for later use.
3. Follow all the instructions on the unit.
4. Pull the plug before cleaning the unit; do not use any liquid or spray
cleaner. Clean with a damp cloth.
5. Do not use the unit near water.
6. Do not put the unit on unstable tables etc. It might fall down and get
damaged.
7. There are slots in the case for ventilation; do not cover these slots
up because they guarantee the reliable use of the unit and protect it
against overheating. Do not install the unit into a frame unless sufficient
ventilation is guaranteed.
8. Do not put any objects on the wire and make sure nobody steps on it.
9. In case you use an extension wire, make sure the sum of the power
consumption of the connected units does not exceed the maximum
power of the wire.
10. Do not spill any liquid over the unit. Do not put any objects through the
slots of the unit, as these might get in contact with parts that are live or
might cause short circuits. This may cause fire and shock.
11. Do not service the unit yourself as parts that are live might be exposed
when you open the case; you run the risk of getting shocked. All services
should only be carried out by a specialist.
12. If one of the following conditions occurs, please pull the plug out and
call the service:
A. Wire or plug is damaged or worn.
B. Liquid got into the unit.
C. The unit was exposed to rain or got damp.
D. The unit does not work properly even if you follow the
instructions of the user manual.
E. The unit fell down and the case was damaged.
13. Only use wires which are marked with safety proof.
14. Do not use any high-power walkie-talkies near the unit.
4