Cooper Lighting LiteKeeper LK8 FK Instrucciones De Instalación página 2

Connecting the Flushmount Kit to the Enclosure
Mounting in the Enclosure
Secure the enclosure to the wall. The preferred method
is to use the standard mounting holes in the rear of the
enclosure. If this is not possible then drilling through the
sides of the enclosure to the frame of the rough opening is
acceptable.
LIGHTING CONTROL
12:00 01/01/08
RELAY
OUTPUTS
Figure 1:LiteKeeper 8 Enclosure Flushmont
2 LiteKeeper® 8 Enclosure Flushmount Kit