Chicco 06620 Manual De Instrucciones página 33

the
aker
p if
vely
To confirm set functions and access secondary
menus, press button 7.
nds
Settings saving will be shown on the display with
the appropriate icon.
nds
To exit from the main menu, press the navigation
high
buttons (8-9) until the icon
press the button (7) to confirm.
aby
Note: If while browsing the main menu and all
secondary menus, no button is pressed within
6 seconds, you will automatically exit from the
(5)
menu without saving any settings and the display
aby
(5) will show the icons relative to settings made up
until that time (see paragraph 1.4).
ated
. In
rect
3.2 Setting functions
3.2.1 Vibration Alarm function
20)
rom
ode,
the
nit.
Activation
t in
Access the main menu pressing button 7. The
Vibration alarm icon will begin to flash on the
display (5). To confirm the your selection, press
enu,
button 7.
and
The possibility to select between "ON", ("ON"
ode.
flashes if this function was previously set) and
"OFF" ("OFF" flashes if this function was not
previously set) will appear on the display. To set
the function, select "ON" with the navigation
buttons (8-9) and confirm with button 7. You will
automatically exit from the menu. The display (5)
will show the operating icon
a short vibration on the unit.
and
sing
Deactivation
Access the main menu via the button (7).
The Vibration alarm icon will begin to flash on the
display (5). Confirm selection with the button (7).
The possibility to select between "ON", ("ON"
flashes if this function was previously set) and
"OFF" ("OFF" flashes if this function was not
previously set) will appear on the display. To
deactivate the function, select "OFF" with the
navigation buttons (8-9) and confirm with
button (7). You will automatically exit from the
menu. The operating icon
disappear (5).
Note: If during navigation within the Vibration
Alarm menu, you decide to exit and return to the
main menu without saving any settings, press the
navigation back button (9) for about 2 seconds.
is shown and
3.2.2 Voice Activation function
Activation
Activation
Access the main menu via the button (7). The
Alarm icon will begin to flash on the display (5)
Press the navigation forward button (8) until the
icon
pressing the button (7).
The possibility to select between "ON", ("ON"
flashes if this function was previously set) and
"OFF" ("OFF" flashes if this function was not
previously set) will appear on the display. To set
the voice activation function, select "ON" with the
navigation buttons (8-9) and confirm with button
(7). You will automatically exit from the menu (5).
The operating icon on the display will appear.
Deactivation
Access the main menu via the button (7).
The Alarm icon will begin to flash on the display
(5)
Press the navigation forward button (8) until the
icon
pressing the button (7).
and you will feel The possibility to select between "ON", ("ON"
flashes if this function was previously set) and
"OFF" ("OFF" flashes if this function was not
previously set) will appear on the display. To
deactivate the function, select "OFF" with the
navigation buttons (8-9) and confirm with button
(7). You will automatically exit from the menu.
The operating icon
disappear.
Note: If during navigation within the Voice
33
on the display will
flashes. Confirm the your selection by
flashes. Confirm the your selection by
on the display (5) will
.