VonHaus 3500114 Manual Del Usuario página 8

SETTING THE USER CODE
With the door open, press the Reset Button (9) and wait for the yellow light to
illuminate.
Input your desired code (3-8 digits) and press * or # button to confirm. Two buzzer beeps
will confirm acceptance of the new code.
If the yellow light flashes with 3 buzzer beeps, you will need to repeat the process again.
NOTE Ensure you press the keys firmly to avoid mistakes.
SETTING THE MASTER CODE
Open the safe, input '0' twice and press reset button. Begin setting the code when the
yellow light illuminates.
Input the new master code (3-8 Digits), then press * or # button to confirm.
This will confirm with 2 beeps and the yellow light will illuminate 2 times. This will indicate
the setting of the master code is successful.
NOTE If the yellow light flashes 3 times, it means the new code is invalid and you should
repeat the process to set.
NOTE: Should you require a replacement key, please contact our customer services
at hello@domu.co.uk and state the number on the lock
6