Soft Ap - Samsung BD-E5900 Manual Del Usuario

5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the player using PBC.
• Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2.
When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the v button to accept.
3.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using PBC
1.
Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2. Select pBC, and then press the v button.
The PBC pop-up appears.
3. Press the pBC button on the Wi-Fi Direct
device within 2 minutes.
4.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using a PIN
1.
Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2. Select pIN, and then press the v button.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
| NOTE |
\ The wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.

Soft Ap

Soft AP is short for Software enabled Access
Point.
Soft AP lets you connect other Wi-Fi devices to
your network through the player and lets you can
enjoy various features such as AllShare network
functionality or network remote control.
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Soft Ap, and then press the v
button.
4. Select On or Off, and then press the v
button.
< To Set the Soft Ap Security Key >
1. On the Soft AP screen, select Security Key,
and then press the v button. The Security
Key screen appears.
2.
On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the v button.
3.
When done, use the the ▲▼◄► buttons to
move to done at the bottom of the screen,
and then press the v button.
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
27
|
English