Princess 182010 Manual De Instrucciones página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
Use the tongs (13) to remove the food
from the appliance.
Remove the mains plug from the wall
socket. The power indicator (2) goes off.
Allow the appliance to cool down
completely.
Regular oven
The maximum capacity for use as a regular
oven without extender ring is 8 litres. The
maximum capacity for use as a regular oven
with extender ring is 12 litres.
Place the appliance on a stable and flat
surface.
Assemble the appliance for use a regular
oven. Refer to the section "Assembly".
Pre­heat the appliance. Refer to the section
"Pre­heating".
Before you proceed, we need you to pay
attention to the following notes:
­
Do not put too much food onto the racks.
Make sure that there is sufficient space
between the food and the heating element
in the lid.
Open the lid (6).
Put the food directly onto the racks
(10/11) in the removable pan (8).
Close the lid (6).
Turn the temperature control knob (5) to
the required position. Consult the food
packaging or the instructions in the recipe.
Turn the time control knob (3) to the
required position. Consult the food
packaging or the instructions in the recipe.
The heating indicator (4) comes on. The
appliance starts heating.
While the appliance is switched on, the
heating indicator (4) will illuminate and
extinguish as the thermostat switches the
heating elements on and off to maintain
the required temperature.
If necessary, turn the time control knob (3)
to increase the time.
If the process is completed, the timer will
ring to remind you that the cooking cycle is
finished. The appliance stops heating. The
heating indicator (4) goes off.
Use the tongs (13) to remove the food and
the racks (10/11) from the appliance.
Remove the mains plug from the wall
socket. The power indicator (2) goes off.
Allow the appliance to cool down
completely.
Stir-fry oven
The maximum capacity for use as a stir­fry
oven is 1 kg.
Place the appliance on a stable and flat
surface.
Assemble the appliance for use a stir­fry
oven. Refer to the section "Assembly".
Pre­heat the appliance. Refer to the section
"Pre­heating".
Before you proceed, we need you to pay
attention to the following notes:
­
Do not put too much food into the
removable pan. Make sure that there is
sufficient space between the food and the
heating element in the lid.
Open the lid (6).
Put the food into the removable pan (8).
Make sure that the food is arranged
evenly.
Close the lid (6).
Turn the temperature control knob (5) to
the required position. Consult the food
packaging or the instructions in the recipe.
Turn the time control knob (3) to the
required position. Consult the food
packaging or the instructions in the recipe.
The heating indicator (4) comes on. The
appliance starts heating.
While the appliance is switched on, the
heating indicator (4) will illuminate and
extinguish as the thermostat switches the
heating elements on and off to maintain
the required temperature.
If necessary, turn the time control knob (3)
to increase the time.
If the process is completed, the timer will
ring to remind you that the cooking cycle is
finished. The appliance stops heating. The
heating indicator (4) goes off.
Use the tongs (13) to remove the food and
the stirring paddle (9) from the appliance.
Remove the mains plug from the wall
socket. The power indicator (2) goes off.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido