Alignment With The Vehicle; Alignment With The Centre Line Of The Vehicle (Example: Volvo) - WABCOWÜRTH W.EASY ADAS Calibration Manual

5 Alignment with the vehicle

There are two possible approaches for alignment with the vehicle:
• Alignment with the centre of the vehicle
• Alignment with the geometric driving axis (in relation to the driven rear axle)
Relevant information can be found in the diagnostic device.
The system can be used on horizontal or level surfaces.

5.1 Alignment with the centre line of the vehicle (example: Volvo)

Alignment with the centre line of the vehicle is carried out in several steps.
1. Position the W.EASY ADAS Calibration at the specified distance and at the specified height in front of
the vehicle (see diagnostic tool)
Red = geometric driving axis
Black = axis of symmetry
21