Door Mounting - Rev-A-Shelf 5730 Serie Manual Del Usuario

STEP 1
Snap two logo caps to the studs
on the front side of the basket.
(Fig K)
STEP 2
Attach Mounting Bracket to slide
with two screws per slide.
A
Insert Door Mounting Bracket
H
between screws and Mounting
Bracket. Tighten screws. Repeat
for opposite side. (Fig L)
NOTE
Door Mounting Bracket should
face towards outside of basket.
STEP 3
Place basket on top of slides and
push back until the basket locks
under the tab at the rear and the
button on the side (Fig M)
NOTE
You should here the button click
when engaged.
H
STEP 4
Using Door Mounting Guidance
on page 8 to mount to door
using four wood screws per
bracket into door.
You may also apply double stick
tape to the Door Mounting
Brackets. Align cabinet door to
surrounding doors/drawers and
press against brackets. (Fig N)
Slowly pull unit open and install
four screws per bracket into
door.
6

Door Mounting

Fig K)
L
I
G
E
A
Fig L)
H
G
Customer Service: 800-626-1126 | rev-a-shelf.com
F
F
I
E
H
H
G
A