Technical Specifications - Prestigio PBSP1 Serie Manual Del Usuario

Others
1. Press " " for 3-4 seconds into pairing mode, to connect with new Bluetooth
device.
2. Press " " to answer or end a phone call.
3. "
4. Recharge battery by using included USB charge cable.
5. If the Bluetooth Speaker does not pair successfully with your device in 2 minutes,
the red LED will flash every 3 seconds.
6. If your device does not connect to the Bluetooth speaker in 25 minutes, the
speaker will be off automatically.

Technical Specifications

Model Name:
Power Supply:
S/N Ratio:
Frequency:
Distortion:
Max Output:
Speaker Unit:
Dimensions:
Weight:
Technical Support and Warranty Information
Please refer to www.prestigio.com
card for warranty information.
Disclaimer
We have made every effort to ensure that the information and procedures in this
user manual are accurate and complete. No liability can and will be accepted for
any errors or omissions.
Prestigio reserves the right to make any changes without further notice to any
products herein.
Bluetooth wireless speaker
" will be disabled when using AUX input
PBSP1
400MAH
＞70 dB
150 Hz- 18 KHz
1%
L1.7W+R1.7W RMS
Φ40 4Ω3W × 2
ø82mm x H80mm
230g
for technical support and the included warranty
EN - 3