Product Details; Standards, Regulations And Directives; Intended Use; Ce Declaration Of Conformity - Bosch CP1 Instrucciones De Instalación

Product details

2 Product details
2.1

Standards, regulations and directives

Observe all country-specific regulations and standards
during installation and operation!
Observe all local regulations governing the discharge of condensate into
the public sewer/drain system.
If the condensate requires neutralisation, the pH value must be raised to
a safe, preferably alkaline, level. If required, fit a neutralising system
(see boiler manufacturer's instructions).
2.2

Intended use

Only use the condensate pump to pump condensate from condensing
boilers, air conditioning systems or cooling appliances.
The condensate pump can remove up to 342 litres of condensate per
hour. Maintain the values given in the specification.
2.3

CE Declaration of Conformity

The design and operation of this product conforms to the European
Directives and the supplementary national requirements. Its conformity
is demonstrated by the CE designation.
2.4

Standard delivery

• Condensate pump
• Accessories supplied ( Fig. 1)
6
Fig. 1 Scope of supply
[1] 2 rawl plugs
[2] 2 screws
[3] 10/8 mm adapter
[4] Clamp
[5] Ø 10 mm drain hose
[6] Installation and operating instructions
10
2.5
Fig. 2 Dimensions
2.6
4,5
1
2
3
4
Fig. 3 Pump rate (l/min) subject to the delivery head (m)
5
6 720 645 612-04.2ITL

Dimensions

268
287

Delivery head

m
4
3
2
1
0
0 1 2 3
40
32
127
6 720 645 612-03.2ITL
l/min
4 5 6
6 720 645 612-05.1SL
CP1 – 6 720 645 612 (2012/10)