Krups GVE1 Manual De Instrucciones página 7

Recommendations :
Cans to be opened should be held by hand as
opening is completed.
When cans are damaged, it may be necessary
to make several attempts.
. The knife-sharpener function
• Remove the knife-sharpener from its storage
position (a).
• Open the positioning aperture (e) and latch
in the accessory (4). The two slots located
on the top of the accessory allow you to
sharpen both sides of your knife.
• Start the appliance by pressing the handle
(b1).
• Position the knife with the side to be
sharpened downwards, and press lightly
while moving the knife along (5).
• Clean the sharpening dust away with a
cloth.
• Maximum use without stopping: 5 minutes.
. The bottle-opener function
• Close the knife-sharpener holder (e).
• To remove the cap from a bottle, place the
bottle in the bottle opener (d)(6).
Cleaning
• After use, disconnect the appliance.
• Clean the motor block and the knife-
sharpener with a damp cloth.
• The handle assembly (b) can be removed
during cleaning. Lift it fully and pull it
forward to remove it. This should not be put
in the dish washer.
Storage
• You have the option of storing your lead (g)
and fixing your appliance to the wall (f).
• To facilitate storage in a cupboard or a
drawer, you can fold down the magnet.
What to do if your appliance
does not work
Check :
- the connection
- that your can is correctly positioned in
relation to the appliance.
If your appliance still does not work,
contact an approved Krups service centre (see
list in the service booklet).
7