Turntable Installation - Alpina SF-7648 Instrucciones De Utilizacion

ENGLISH
•
To keep the microwave oven at a distance from the wall, it is necessary to install a distance limiter.
Hole A
Clasp C
Clasp B
Hole A
Clasp A
Push Distance Limiter
in this direction
Secure Clasp A to Hole A
1. Push Distance Limiter in the given direction
2. Make sure clasp A is secured to whole A
3. Insert clasp B and clasp C into their respective square wholes
TURNTABLE INSTALLATION
•
Remove all packing material and accessories. Check the
oven for any damage such as dents or broken door. Do
not install if oven is damaged.
•
Do not remove the light brown Mica cover that is
attached to the oven cavity to protect the magnetron.
•
Never place the glass tray upside down. The glass tray
should never be restricted.
•
Both glass tray and turntable ring assembly must
always be used during cooking.
•
All food and containers of food are always placed on
the glass tray for cooking.
•
If glass tray or turntable ring assembly cracks or breaks,
contact your nearest authorized service center.
OPERATION
Control Panel, Features & Operation
•
Connect the cord.
•
Place the food microwave container and place on
glass.
•
Select your desired function from menu
•
Set the timer. If you set the time make sure it is
not less than 2 minutes, first turn the timer to
over 3 minutes position and then turn back to
your desired time.
•
The microwave oven will automatically start cooking
after power level and time are set.
•
When the cooking time is done, the unit will "Dong"
to stop.
Caution: When removing food from the oven, please
ensure that the oven power is switched off by turning the
timer switch to 0 (zero). Failure to do so, and operating the
microwave oven without food in it, can result in
overheating and damage to the magnetron.
All manuals and user guides at all-guides.com
3
Distance Limiter
Hub (underside)
Glass tray
Turntable shaft
Turntable ring assembly
Timer
Power