Using The Oven - Novy 2917 Hoja De Características

Setting the Electronic Clock
When you switch on the oven, you will notice
that the word AUTO will flash on the display with
00:00. Press the + and – symbols together
until you hear a beep and see a dot flashing
between the digits of the clock. Then set the
clock time by pressing on the + or – symbols.
You will hear a beep to confirm that the time
has been set. The
Should you wish to change the time, follow
these instructions again.
Manual Operation
After setting the clock, the oven is ready for
use. Select a cooking temperature and function
by pressing and turning the oven controls.
To turn off the oven, set the controls to
Push down on the controls to conceal them.
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to pro-
gramme cooking time length, after which the
oven will turn off automatically.
Cooking Stop Time: This function allows you to
programme the time for cooking to stop, after
which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been pro-
grammed for. It switches itself off automati-
cally at the entered stop time.
Changing the Clock Alarm Tone
1 Press + and – at the same time. You will
notice a dot light up between the + and –
symbols on the clock display.
20

Using the Oven

symbol will remain lit.
2 Press MODE and you will see "ton1" light up
on the clock display.
3 The alarm tone can be changed by repeat-
edly pressing on the – symbol.
Programming the Timer Alarm
1 Press on MODE until the
flash on the clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or –.
3 The alarm will be confirmed by a beep and
the display will show the current time. The
symbol will remain lit.
4 At the programmed time, the alarm will
sound and the
. 5 Press on any symbol to turn off the alarm.
The symbol will continue to flash.
6 Keep pressing MODE until the function is
switched off.
You can see how much time is left at any time
by pressing MODE until the
You can then change the selected time by
pressing + or -. The beep you hear will confirm
the new time has been set.
Programming Cooking Time
1 Press MODE until you hear a beep. Press
MODE again and the word "dur" will appear
on the clock display.
2 Select the cooking time by pressing + or –.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
symbol will
symbol will begin to flash.
symbol flashes.