Installing/Replacing the Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
1. Squeeze and pull to release the battery
cover latch. You can remove the battery
door with your fi ngernails by using the
spaces set back in wall.
2. Match the polarity on the Lithium Cell
with a plus sign (+) on the battery tray.
3. Slide the tray with new battery into the
battery compartment until you hear a
click sound.
WARNING
- When Using the Battery
Store the battery in a place where children cannot reach. If a child
accidentally swallows the battery, consult a doctor immediately.
Do not recharge, short circuit, disassemble, heat the battery, or
dispose the battery in fi re. Doing any of these things may cause
the battery to give off heat, crack, or start a fi re. Do not leave the
battery with other metallic materials. Doing this may cause the
battery to give off heat, crack, or start a fi re.
When throwing away or saving the battery, wrap it in tape and
insulate; otherwise, the battery may start to give off heat, crack, or
start a fi re.
Do not poke the battery with tweezers or similar tools. Doing this
may cause the battery to give off heat, crack, or start a fi re.
This product contains a CR Coin Cell Lithium Battery that contains
Perchlorate Material, so that special handling may apply.
6
En-
NOTE
If you are not going to use the remote control for a long time,
remove the battery to avoid any damage that may be caused by
leakage and corrosion.
Connecting the AC Adapter
WARNING
Only use the AC adapter provided with the unit.
Ensure that power supply outlet matches with the unit AC's input
100-240V, 50/60Hz before connection.
Positive (+) side
1
Insert the AC Adapter into DC IN jack of the unit.
2
Insert one end of the Power Cord into the end of the AC
Adapter and the other end into an electrical outlet only after
all other connections are completed.
18
To AC wall outlet