Instructions
Parking brake
To lock the wheels, depress the red secu-
ring button situated at the brake lever 7 and
swing the lever down. The two toothed bra-
ke-crown wheels engage, which is indicated
by a click sound. To release the brake,
swing the lever up until it snaps into place.
Having parked the pram, try to push it to
check the brake.
when placing the baby in the carriage or taking it out of it.
Adjusting the parking brake
After prolonged use, the wheels
may cause a rattling noise. You
can eliminate the problem by
readjusting the setting screw 7a
situated at the brake housing.
Sun canopy
Press the two front hood bows
10 together to adjust the hood.
Adjusting the hood can be effected
silently. By taking off the rear hood
section 11, the hood can be converted
into a sun canopy by means of a zip
fastener.
Adjust the handbrake
Readjust the hand brake by means
of the cable adjusting barrel 9 (above).
A different brake effect on the two rear
wheels can be corrected by means of
the cable adjusting barrel 9a (below).
Adjustable suspension system
By turning the selector 8, a „hard"
or „soft" position can be selected for
suspension.
18
WARNING!
Make sure the brake is always closed
7
7a