Under Armour HEALTHBOX Guia De Inicio Rapido página 10

Turning on your UA Heart Rate
1. Attach the module to the chest
strap. Make sure the dot on the top
of the module is facing upwards.
2. Remove the sensor pad covers
and then touch both sensor pads
on the back of the chest strap.
UA Heart Rate turns on with
skin contact.
3. A blue light will start flashing on your UA Heart Rate to indicate it
is now ready to be paired with UA Record™.
Note:
• If the blue light does not start fl ashing when touching the sensors on the strap, try moistening
your chest strap sensor pads with a few drops of water or saliva and then touch again.
• If your battery power is too low, the UA Heart Rate will be fl ashing red for 10 seconds after it
starts. Your battery will need to be replaced.
9