Replacing The Remote Control Battery; Technical Parameters - ACME F-100-01 Manual Del Usuario

Replacing the Remote Control Battery

1. Remove the battery compartment cover by pulling the cover in
the direction of the arrow.
2. Remove the battery.
3. Insert the replacement battery.
• Keep attention on the direction of the correct polarization (+/-).
4. Put the cover back to the battery compartment.

Technical Parameters

Storage temperature:
Working conditions temperature: 0°C up to +40°C
Operation relative humidity:
Storage relative humidity:
EMI standard:
Supply voltage:
Electric current:
Bit rate:
FM transmitting frequency:
Transmitting frequency options:
Frequency response:
SNR (Signal to Noise Ratio):
Harmonic distortion:
Transmitting distance:
Security and Disposal Hints for Batteries
• When a child swallowed a battery by mistake go to a doctor's
place or bring the child into a hospital promptly!
• Never short batteries.
• Look for the right polarity (+) and (-) of batteries! Always change
all batteries, never use old and new batteries or batteries of
erent types together.
-5°C up to +45°C
20% – 90% (40°C)
20% – 93% (40°C)
FCC (class B)
12V-24V DC power
12V (normal working) <100mA
32Kbps – 256Kbps
87.5 – 108.0 MHz
Press CH key to switch channels
(can be stored in advance).
30 – 15 KHz ± 3db
30db
≤1%
3 – 5 m
GB