Publicidad
Install serial interface
1. The hardware assistant appears with a newly found serial interface. Choose
"No, not this time" and click "Continue".
2. Choose "Install software automatically" and click "Continue".
3. Click "Continue installation".
4. Click "Finish".
5. When the other serial ports are found, repeat steps 1-4 four times.
Your PCI card is installed and ready for use.
Windows XP Service Pack 1
Controller installation:
1. After installing the hardware and starting your computer the hardware
assistant will appear.
2. Put the driver CD in the CD-ROM drive, choose the driver "nm9845s" and click
"Continue".
3. When driver is located, click "Continue installation".
4. Click "Finish".
Install serial interface
1. The hardware assistant appears with a newly found serial interface.
2. Choose "Install software automatically" and click "Continue".
3. Click "Continue installation".
4. Click "Finish".
5. When the other serial ports are found, repeat steps 2-4 four times.
Your PCI card is installed and ready for use.
Windows 2000
1. After installing the hardware and starting your computer the hardware
assistant appears.
2. Put the driver CD in the CD-ROM drive and click on "next".
3. Choose "Automatically search for driver" and click "Continue".
4. Select the "CD drive" option and click on "next".
5. After the driver "nm9845s" is located, click on "Continue".
6. Click "Finish".
7. Your PCI card is installed and ready for use.
-3-
Publicidad
