Franklin FWC36 Manual Del Usuario página 5

Enfriador de vinos para 36 botellas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
The FWC36 Wine Cellar is designed
to be either free-standing
or built-in.
It has a fan at the
bottom of the unit to direct compressor-generated
heat away from the compressor
and
through vents in the front of the unit. There must
be a minimum of 3" of space around both
sides and the back of the appliance
and the airflow from the vents at the front of the system
must be unimpeded.
Once the unit is positioned,
the leveling
legs should be turned to level the Wine Cellar.
Electrical Connection
Important!
For your personal
safety, this appliance
must be properly grounded.
In the
event of an electrical
short circuit, grounding
reduces the risk of shock by providing
an
escape wire for the electric current. This appliance
is equipped
with a cord having a
grounding
wire with a grounding
plug. The plug must be inserted into an outlet that is prop-
erly grounded
and installed.
Consult
a qualified
electrician
if you do not completely
under-
stand the grounding
instructions.
DO NOT UNDER ANY CIRCUMSTANCES
CUT OR REMOVE
THE THIRD (GROUND)
PRONG FROM THE POWER
CORD.
Use of Extension
Cords
Avoid the use of an extension
cord because
of potential safety hazards under certain condi-
tions. If it is necessary
to use an extension
cord, be sure to use only a 3-wire extension
cord that has a 3-blade
grounding
plug. Use a 3-slot outlet that will accept the plug. The
marked rating of the extension
cord must be equal or greater than the electrical
rating of
the appliance.

Publicidad

Tabla de contenido
loading

Productos relacionados para Franklin FWC36

Tabla de contenido