English; Technical Data; Ec Declaration Of Conformity - DeWalt D51256 Manual De Instrucciones

E N G L I S H
NAILER D51256/D51275
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Sound pressure (L )
pA
Acoustic power (L )
WA
Hand/arm weighted
vibration
Recommended operating
pressure
Max. operating pressure
Air consumption per shot
Actuating mode
Magazine angle
Fasteners
length
shank diameter
angle
Weight
1)
This value is a tool-related characteristic value and
does not represent the influence to the hand-arm-
system when using the tool. The influence to the
hand-arm-system when using the tool will for example
depend on the gripping force, the contact pressure
force, the working direction, the adjustment of energy
supply, the workpiece and the workpiece support.
EC-Declaration of conformity
D51256/D51275
D WALT declares that these tools have been designed
E
in compliance with:
98/37/EC, EN 792-13, EN 12549, EN 12096
For more information, please contact D
address below, or refer to the back of the manual.
20
D51256.P65
D51256 D51275
dB(A) < 82 < 82
dB(A) < 95 < 95
2
m/s 2.7 2.7
bar 4.9 - 8.3 4.9 - 8.3
bar 8.3 8.3
l 4.5 6.0
(at 6.9 bar) (at 6.9 bar)
contact contact
actuating actuating
0° 34°
mm 32 - 65 32 - 65
mm 1.6 1.8
(16 gauge) (15 gauge)
0° 34°
kg 1.77 1.75
WALT at the
E
20
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
Safety instructions
When using tools, always observe the safety
regulations applicable in your country to reduce
the risk of personal injury. Read the following
safety instructions before attempting to operate
this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose tools to humidity. Keep work area
well lit. Do not use tools in the presence of
flammable liquids or gases.
3 Keep children away
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
4 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
5 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
6 Do not overreach
Keep proper footing and balance at all times.
7 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
28-12-2001, 09:21