Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
Installing an expansion card
1.
Remove the metal cover opposite the
slot that you intend to use.
3.
Insert the card connector to the slot��
then press the card firmly until it fits in
place.
4.
Replace the metal bracket lock.
Installing storage drives

Optical drive

1.
Place the chassis upri�ht�� then remove the upper 5.25" drive bay metal plate cover.
2.
Insert the optical drive to the bay�� then carefully push the drive until its screw holes
ali�n with the holes on the bay.
3.
Secure the optical drive with two screws on both sides of the bay.
4.
Connect the I�� (4A) and power (4B) plu�s to connectors at the back of the drive.
3
Floppy disk drive
If the system comes without a portable hard disk (optional), then you may install a floppy disk
drive into the 3.5-inch drive bay.
1.
Place the chassis upri�ht�� then remove the upper 3.5" drive bay metal plate cover.
2.
Insert the floppy disk drive to the bay, then carefully push the drive until its screw holes
ali�n with the holes on the bay.
3.
Secure the floppy disk drive with two screws on both sides of the bay.
4.
Connect the si�nal (4A) and power (4B) plu�s to connectors at the back of the drive.
3
V7-P5G43 QSG.indb 7
1
2
3
3
2
Installation manual
2.
Remove the metal bracket lock.
2
4
4A
4A
3
4B
4B

��1�0� 4:5�:55 PM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

V7 serie

Tabla de contenido