English - Genius BLAZE Manual Del Usuario

Wireless PS2 Controller User Manual
Warning
Please read & follow all warnings in this manual or your video game system instruction manual &
video software for safety, health & other information.
Do not submerge in water
Do not disassemble any part of controller & receiver
Do not place heavy objects on top of controller & receiver
Do not allow small children to play with controller & receiver unsupervised
Do not use this controller in any other way than its intended use
Do not unplug controller cable while the console is turned on
Keep away from areas where dirt or liquid can get into controller & receiver
Keep away from extreme temperatures
Store in areas away from dust and humidity
Turn off or discontinue use of Vibration function if you have any hand or wrist ailments or if you
have any injury's to which the vibration creates discomfort to you in any way
Instruction
1. Remove the battery cover on the back of the controller
and insert 2AA batteries. Replace the cover.
2. Plug the receiver into one of the PS2 controller ports
of the PS2 console.
3. If the LED on the receiver does not automatically
begin flashing, press the connect button on the
receiver. The red LED should now be flashing. This
indicates that it is searching for a controller to connect
to.
4. Turn the controller on using the on/off switch on the
controller.
5. If the LED on the controller is off or flashing, press
the connect button on the controller. If it automatically
turns on, proceed to the next step.
6. The controller and receiver should be connected now.
The red LED on the controller should be on, and the
red LED on the receiver should have stopped
flashing and should be on .You are now ready to play.
Repeat the above procedure for each additional player using a wireless controller, one at a
time.
Continue connecting them one at a time until all your controllers are connected. You may
use up to 16 of these controllers in one area without interfering with each other.
PlayStation®2 and PlayStation® Function
1. Analog Mode: When the controller is in analog mode, the following buttons and sticks may be
1

English