Control Parameters Of The Purifier - Vortice DEPURO PRO Serie Manual De Instrucciones

4.2.5. CONTROL PARAMETERS OF THE PURIFIER

The user must choose the setpoint based on:

the size of the room (surface in m

the number of purification cycles (N) to be performed for each hour of product operation.
Vortice suggests a number of purification cycles (N) equal to 2 or 3 volumes for hour (volumes / h).
The following show the most suitable Setpoint for N=2 and N=3 as a function of two typical ceiling heights (3m and
2.5m).
NOTE:

in the following tables,the set points highlighted in the gray area indicate operating conditions of the machine
where the filtering capacity of the product is not optimal.
Don't use Setpoint values lower than specified.


For the installation of DEPURO PRO EVO in closed places, it is recommended to check the MINIMUM volume
of the room equal to 45m3. The table indicates the corresponding MINIMUM surface area (Smin) of the room
according to the ceiling heights H:
H [m]

2

2,5

3

3,5

4
2 and ceiling height) where the purifier will be installed
2
S min [m ]
23,0
18,0
15,0
13,0
12,0
48