Troubleshooting - AUDIOLINE Wireless Phone Jack Guia De Instalacion

Problem
No dialing tone available – Base unit power not on
My dial-up modem/
set top box/fax is not
working
Short "hissing" sound
heard on phone attached
to the Extension unit
when first picked up
The extra extension unit
is blinking before starting
a registration procedure
The lightning flash with arrowhead symbol within an equilateral triangle is
"Caution"
Warning:
The crossed-out wheeled bin symbol that can be found on your product means
T R OU B L E S H OO T I N G
Possible cause
– Cables not correctly
connected
– The Extension unit may not
be registered to the base
– The Extension unit is out
of reach
The Extension unit switch
has not been set to modem
functionality
The Extension unit
switch has not been
set properly
The extra extension unit is
already registered to another
phone jack
Solution
– Check all power and cable connec-
tions. If in doubt please refer to the
user manual. Check that the
Extension unit switch is correctly
set to either S or C
– Relocate the Extension unit within
signal reach of the Base unit (max
50m)
Make sure that the Extension unit
switch is set to C
Make sure that the
Extension unit switch
is set to S
Turn power on-off, 5 times in a row
until the light is continuously red.
Hereafter continue extra extension
extension unit installation
9