Installation - Philips SPIDEM TREVI DITIAL RS AAC SUP018MDR Instrucciones De Uso

Installation

4 INSTALLATION
For your own safety and the safety of
others, you must strictly comply with
the “Safety Rules” described in chap.3
4.1 Package
The original packaging was designed and
made to protect the machine during
shipping. We recommend keeping it for
future transport purposes.
4.2 Preliminary oprations
• Remove the packet containing the lid,
the key for the brew group and the
cleaning brush from the packing
materials.
• Take the coffee machine out of its
packaging and position it in a suitable
place conforming to the requisites
described in the safety rules (chap.3.)
• Fit the coffee container lid (10) onto the
coffee container (9); store the brew
group key and cleaning brush in a safe
place.
• Make sure that the tray (2) with grill, the
dump box (1) and the brew group (14)
are correctly fitted and that the front door
(13) is closed.
• Before plugging the machine into the
mains, make sure the button (16) is on
OFF .
4.3 Turning on for the first time
• Lift out the water container (7) and
28
remove the lid (8). Rinse it out and fill it
with fresh drinking water, making sure
you do not overfill it. Lower the container
back into place inside the machine and
replace the lid.
Fill the container (7) only with
cool, fresch water. Hot water
or other liquids may damage the
container and/or the machine.
Always make sure there is enough
water inside the container before
starting the machine.
• Take off the lid (10) and fill the
27
container with whole coffee beans (9).
• Fit the lid of the coffee container back
into place.
Fill the container (9) with whole
coffee beans only. Ground or
freeze-dried coffee or any other objects
will damage the machine.
• Insert the plug (15) into a suitable outlet.
• The button (16) is positioned on OFF .
Simply press the button (16) to turn on
the machine.
• Press the button (6); the machine will start
heating up.
r i n s i n g
w a r m i n g u p
display.
It will take the machine about 2 minutes
to heat up.
As soon as it reaches the right tempera-
ture it will perform a cleaning cycle.
At the end of the cycle the message
s e l e c t p r o d u c t
r e a d y f o r u s e
display.
4.4 Priming
• Position the steam wand (5) over
30
the drip tray.
• Press the button (21) to switch the
machine over to the hot water dispensing
function;
s e l e c t p r o d u c t
r e a d y f o r u s e
will be displayed in turn.
• Turn the knob (6) counterclockwise and
wait until water flows smoothly from the
steam wand; to cut off flow, turn the knob
(6) clockwise.
29
The message
will appear on the
will appear on the
the messages
h o t w a t e r
r e a d y f o r u s e