Waves HP-104531 Manual De Instrucciones página 3

1. Hotplate
2. Indicator light
3. Thermostat adjustable control knob
BE SURE TO READ IMPORTANT SAFEGUARDS ENCLOSED.
HOW TO USE YOUR HOT PLATE
Before using your hot plate for the first time, turn the hot plate to the highest setting (position 5)
for 3 to 5 minutes to protect the coating. This should be done when there is no cooking utensil
on the hot plate.
1. Put the hotplate on a flat, dry and heat resistant surface.
2. Turn temperature control dial to "0".
3. Put the plug into power outlet.
4. Turn control dial from "0" to any selected setting. The unit will cycle on and off to main
selected temperature.
5. The indication light at the front of appliance will turn off when the hot plate reaches the
selected temperature, and the procedure of the heating will stop and recycle to maintain
the temperature.
6. Heating Element will begin to heat immediately. Do not touch while in use the metal
surfaces will become hot.
7. When not in use, unplug cord from wall outlet and allow until to cool completely.
WARNING!! Please do not touch surface while in use. The accessible surface may get hot when
the appliance is operating.
CAUTION
Do not use pans that are unstable and easily tipped. Use flat‐bottom pans to insure full contact
with the hotplate for maximum heat efficiency.
For long‐life performance, avoid dropping any items onto the hotplate.
When use this hotplate for the first time, there are some smoke, it is normal and safe.
HOW TO CARE FOR YOUR HOTPLATE
Always unplug unit and allow for cool before cleaning. Never immerse in water.
Clean hotplate with a soft, damp cloth or a non‐abrasive cleaner. Wipe dry.