Publicidad
Idiomas disponibles
Idiomas disponibles
9. PRESET PRESSURE VALUES
MODE SWITCH
Short press "Mode button" to switch between the following
five inflation scenarios. Select the correct inflation scene
before inflation, and long-press the "mode button"
to switch between bar and psi.
The factory default preset pressure value is 35psi,the preset
pressure can be adjusted freely before operation (values and
units can be memorized). Adjustable range: 3-150psi
Bicycle mode light: the default 45psi
Adjustable range: 30-65psi
Motorcycle mode light: the default 2.4bar
Adjustable range: 1.8-3.0bar
Car mode light: the default 2.5bar
Adjustable range: 1.8-3.5bar
Ball mode light: default 8psi
Adjustable range: 4-16psi
FINE-TUNING PRESETS
After selecting the scene mode, short press "+" or "-" to
accurately adjust the preset pressure value;
Long press "+" or "-" to quickly adjust the pressure value.
When adjusting the preset pressure value, the number flashes
to indicate the target pressure adjustment status, and the long
light digital indicates the current pressure value.
MULTIFUNCTIONAL LIGHTING
Press the "light button" to turn on the light. Press repeatedly
to switch the light mode to white light, red warning light, and
red SOS light.
START INFLATING
Press the "start/stop button" to start inflation. The screen
will display the current pressure value. The pump will
generate normally between 75-80 dB noise during inflation.
Working for a long time, the hose and the pump itself will
get hot, avoid long-term usage of the pump (>10 minutes)
and avoid contact with the hot air hose and the pump.
Let it cool before you touch it.
STOP INFLATING
When the air pressure reaches the preset pressure value,
the air pump will automatically stop working.
During the inflation process, you can also stop the pump by
short pressing the "start/stop button"
SHUTDOWN
In the power-on state, the pump will power off automatically
after inserting the air hose after 10 seconds without any
operation. In the power-on state, press the Start/stop button
for several seconds to shut down manually.
BATTERY AND BATTERY LIFE
Fully charged at 25°C ambient temperature, the
-
continuous working time is about 30 minutes.
Higher pressures or lower ambient temperatures will
-
reduce the battery working time.
10. SPECIAL NOTES
The inflation pressure of items such as balloons, toy
-
balls, swimming rings and other products is lower than
the range of this air pump, and the inflation cannot be
automatically stopped by the preset pressure. The
Coolado ePump is a better choice for these items.
Before inflating, please confirm the air pressure value
-
required to avoid injury caused by over-inflation
bursting.
Please avoid putting it in a high-temperature environ-
-
ment such as a car that can be exposed to direct
sunlight;
Do not bend or step on the inflation tube during
-
inflation to keep the airflow smooth.
Stay near the pump when the air pump is working and
-
make sure the air pump is not over-pressurizing.
Protect the pump against moisture, heavy falls, water
-
immersion, and mud or sand intrusion;
There is a DC motor in the air pump, which may
-
generate electric sparks during operation. So do not
put it near flammable liquids or gases when in use.
This product is a professional tool and not a toy, keep
-
away from children; keep a safe distance from children
when inflating objects;
Before setting the inflation pressure value, please
-
make sure that you have selected the correct measure-
ment unit, it may lead to high air pressure danger.
Publicidad
